Why a Lump-Sum Equipment List Cannot Be Quoted or Compared
A one-line scope such as "adventure attractions" names a direction, not equipment. It carries no model, no quantity and no participant group, so a supplier reading it has nothing specific to price and a buyer has nothing specific to compare.
An adult indoor playground brief succeeds when it tests attraction families one by one, records measured site constraints, splits supply scope into work packages and ties each report to a selected attraction before any quotation is compared.
A four-gate buying sequence replaces the lump sum: test attraction families one by one, record measured site constraints, split supply scope into owned work packages, and tie each report to a selected attraction before comparing quotations. Each gate produces a document the next gate refers to, and the full attraction-by-attraction purchase structure keeps those documents tied to the same items.
A lump sum also hides where the factory quotation stops and the buyer's local work begins. When every attraction sits inside one total, the point at which equipment supply ends and site work, freight or installation begins disappears with it.
Splitting the request family by family changes what a returned figure can do. Each family can be priced, queried or dropped on its own terms, so a family that is still being tested does not hold back the ones that are settled.
The output of this gate is a written attraction list. That list is the reference document the site-constraint record and the supply-scope split must both match, so later figures trace back to the same items rather than to a single rolled-up number.

Step 1: Test Attraction Families and Themed Directions One by One
Step 1 produces the attraction list that every later document refers to. Each attraction family, and each themed direction inside a family, gets one confirmation field written against it before it enters the priced request. That field states what has to be settled for that family: the participant group, the movement and landing demands, the supervision arrangement, or the supplier's confirmed availability.
Treat a theme as a planning direction rather than an order code. Fitness theme, sport theme and castle theme adult playground concepts describe the character a supplier can build toward. Supplier availability, product scope and intended users for each direction have to be confirmed before a theme becomes a priced line.
| Family or direction | What the visitor does | Field to confirm before pricing |
|---|---|---|
| Obstacle systems | Takes on modular physical challenges, timed courses and team obstacles | Participant loading, grip elements, fall zones and supervision for the selected system |
| Trampoline and jump zones | Uses free-jump courts and selected group activities | Approved participants, court geometry and landing interfaces |
| Climbing and rope adventures | Takes climbing challenges and elevated routes | Rope equipment supply, protection systems and adult suitability |
| Parkour and agility zones | Moves through balance elements and movement routes | Activity intensity, progression, landing surfaces and separation from through traffic |
| Shared social and spectator space | Watches, waits, briefs and regroups around the active zones | Briefing, waiting and spectator space planned alongside the attractions |
| Fitness theme adult playground direction | Undergoes a workout-led configuration within the selected attraction family | Supplier availability, product scope and intended users for this theme direction |
| Sport theme adult playground direction | Competes within a sport-led configuration of the selected attraction family | Supplier availability, product scope and intended users for this theme direction |
| Castle theme adult playground direction | Moves through a castle-styled presentation of the selected attraction family | Supplier availability, product scope and intended users for this theme direction |
A catalogue reference does not establish adult suitability. Participant limits, structural configuration, activity envelopes and supervision requirements must be checked for each selected model before it is written into the brief.
A family or direction whose confirmation field is still blank stays on an open-questions list, not on a priced line. The finished attraction list therefore carries two groups: items with a settled field, and items waiting on a named question.

Step 2: Record Measured Site Constraints Before Choosing Equipment
Step 2 produces a constraint record that sits beside the Step 1 attraction list. This is the part of the brief a supplier cannot produce, because the layout and every itemized price rest on measured building information rather than on a lease document or an impression of the empty hall. One record is attached to the attraction list, so the field confirmed for a family and the position it is assigned refer to one set of venue figures.
Usable floor area is the figure the layout is drawn against. It is measured inside the leased footprint with columns, fixed plant and the required visitor and staff circulation subtracted, because all of those sit within the footprint and reduce what equipment can occupy.
Clear height is measured from the finished floor to the lowest overhead obstruction at each position, with beams, ducts and sprinklers noted as they are found. The lowest figure at each position controls what fits there, so a single building-wide height hides exactly where the space is tight.
| Measured item | How it is measured | Why it changes the equipment selection |
|---|---|---|
| Usable floor area | Measured inside the leased footprint with columns, fixed plant and required visitor and staff circulation subtracted | The lease area includes obstructions, so only the measured usable area is the figure the layout and price are drawn against |
| Clear height at each position | Measured from the finished floor to the lowest overhead obstruction at that position, with beams, ducts and sprinklers noted | Overhead services reduce height within the same room, so the lowest figure at each position controls what fits there |
| Local building work and approval responsibility | Named in the brief as local building work and as the appointed local advisers' responsibility | Writing the boundary down keeps the equipment package separate from the building work the supplier does not carry out |
Record the lowest height position by position rather than one height for the building. Beams, ducts, sprinklers and other overhead services can pull that figure down in one part of the room while leaving another part open.
Floor preparation, fire systems, lighting, HVAC and electrical work are local building work, and approval sits with the appointed local advisers. Naming both alongside the measurements writes the boundary down before any scope is split between the factory and the venue team.
Attach the finished constraint record to the Step 1 attraction list, and each attraction on that list is then tested against the same measured space.

Step 3: Split Supply Scope into Work Packages with a Named Owner
Step 3 turns the attraction list and the constraint record into a supply-scope split. A rolled-up total hides the point at which the factory quotation stops and the buyer's own budget begins, so the split is written down before any figure is compared. Every line is assigned to one work package, and every work package ends with a party who confirms the boundary in writing.
Shipping and installation sit outside the default factory scope. A quotation that leaves them out describes a narrower package than one that carries them, so each returned figure has to state whether transport and installation are included or excluded before the two are set side by side.
| Work package | What the factory quotation covers | What the buyer's local team budgets or appoints | Who confirms the boundary in writing |
|---|---|---|---|
| Play equipment | Itemized attraction types, quantities, specifications and customization in the factory quotation | Confirm the target users and operating brief, and review what is included before comparing quotations | Supplier for the itemized equipment list; buyer to check it against the approved attraction list |
| Layout and engineering | 2D zoning, 3D design and equipment documentation within the agreed design scope | Appoint local structural and building advisers; confirm approval responsibilities and any specialist review fees | Supplier for the drawing revision; buyer for the local adviser appointments |
| Shipping and installation | Packing, container requirements and the technical support specified in the quotation | Budget destination transport, import costs and local installation work according to the agreed delivery terms | Named per quote line, with the delivery point and who unloads written down rather than left blank |
| Building fit-out | Identify equipment interfaces that the appointed building team needs to coordinate | Budget floor preparation, fire systems, lighting, HVAC and electrical work with local contractors | Buyer's building team, with the equipment interface confirmed by the supplier |
| Operation and permits | Provide the operation and care information agreed for the supplied equipment | Budget insurance, approvals, staffing, inspections and maintenance with the operator's appointed advisers | Operator's appointed parties, with the care documents confirmed against the supplied equipment |
Insurance, approvals, staffing, inspections and maintenance stay with the operator's appointed parties. A quotation that stays silent on one of these items has not transferred it, so silence is read as an open question rather than as an inclusion.
A blank cell, or an entry that says "by others" without naming the party, records a question that is still unresolved. The line stays open until one party confirms the boundary in writing, and it belongs in the open-items log rather than in the comparison.
The finished split attaches to the same two documents that came out of the earlier steps. Each work-package row names the attraction or interface it serves, so a figure returned for shipping, fit-out or permits traces back to the selected attractions and the measured space rather than floating free.

Step 4: Tie Each Report to a Selected Attraction Before Comparing Quotations
Step 4 closes the sequence. Every report, certificate or supplier statement is filed against one selected attraction and the model that document names, so a returned figure arrives with evidence attached to the same items the attraction list and work-package table already carry.
A trampoline-court certificate is issued for trampoline courts. A children's playground report covers the playground equipment sample it tested. Neither can be read as blanket certification for every adult attraction inside a mixed venue, because each covers a named item in a listed configuration rather than the assembled site.
The same rule governs standards statements. A supplier statement naming ASTM F1487, ASTM F3101, EN 1176, EN 166630, CPSC, ADA and TÜV compliance is recorded against the attraction and tested model it names, and the entry reproduces the standard designation rather than summarising it as "compliant".
| Register field | What it records | Why it is recorded per attraction |
|---|---|---|
| Report or certificate number | The reference exactly as printed on the document | Links the entry to one identifiable document rather than to a general statement of conformity |
| Tested model or configuration | The model, sample or configuration the document names | Shows whether the document covers the attraction actually selected for this venue |
| Issuing body | The organisation that issued the document and the standard designation it cites | Identifies who tested or attested the item, so the reference can be verified at source |
| Revision or issue date | The revision or issue date stated on the document | Dates the evidence against the equipment version in the brief |
| Document scope | The clauses, sample and exclusions the document states | Confirms what the document does and does not cover before it is counted as evidence |
| Requirement field | Held open until the appointed local advisers name the requirements that apply | Keeps the applicability question with the party responsible for local approval |
Equipment conformity documents and local project approval answer different questions. A manufacturer's document says what an item is and how it performed in testing; it does not approve a building, a fire strategy or an operating permit. Leave the requirement field open until local advisers name what applies to the destination.
Once each row carries a number, a tested model and a stated scope, the register attached to one attraction can be set against the register attached to the same attraction in another offer. A row with an empty model or scope field stays in the open-items log until the document is supplied.

Pre-Inquiry Checklist: What the Pack Contains Before You Contact a Supplier
The four gates produce four documents, and the pack is not finished until all four exist and every unresolved field is marked as unknown rather than left blank. Work through the steps below in order, because each document is built on the one before it.
- Attach the attraction list with one confirmation field written against every attraction family and every themed direction.
- Attach the measured constraint record, showing usable floor area and the lowest clear height at each position.
- Attach the work-package table with a named owner on every line, including shipping, installation, fit-out and permits.
- Attach the document register, filing each report or supplier statement against one selected attraction and the model it names.
- Mark every field you cannot answer as unknown rather than blank or assumed.
- Send the four documents as one file set so the supplier reads the same brief you built.
Returned figures are read in a fixed order, and the totals come last. First check that an offer works from the same attraction list, then that it uses the same measured constraint record, then that its work-package split states transport and installation as included or excluded, then that its documentation is filed per attraction. Only after those four comparisons does the total mean anything.
A line that cannot be traced to one of the four documents stays in an open-items log rather than in a ranking. A figure that refers to no attraction on the list, no measured position, no named work-package owner or no identified document has nothing to be compared against, so it waits until the missing reference is supplied.

Frequently Asked Questions
Can a fitness, sport or castle theme be specified as an order line before the supplier confirms availability?
No. Each themed direction is a planning direction until its confirmation field is filled in, so it stays on the open-questions list rather than on a priced line until supplier availability, product scope and intended users for that direction are confirmed in writing.
Which clear-height figure do I record when two positions in the same room differ?
Record the lower of the two, at its own position. Clear height is measured from the finished floor to the lowest overhead obstruction at each position, so the tighter spot keeps its own figure instead of being averaged into a building-wide number.
What happens to a work-package row when no party will confirm ownership?
It stays open. The row is kept in the open-items log and is not counted as allocated, because an ownership boundary only takes effect when one party puts its name to it in writing; until then the question mark sits on the buyer's side of the comparison.
Can one certificate be listed against an entire mixed-attraction adult venue?
Not as blanket coverage. A report or certificate names the item, model or configuration it tested, and a venue that mixes obstacle, trampoline, climbing and social zones holds attractions that no single scoped document covers, so each attraction needs its own entry.
Does a supplier's standards statement count as local approval for my venue?
No. A statement citing ASTM F1487, EN 1176 or another designation describes what an item was tested against, while building, fire and operating approvals are issued by the destination's own authorities, so the two sit in separate fields of the brief.

Next Step: Send One Brief, Not Three Assumptions
The attraction list, the constraint record, the work-package table and the document register make up one brief, not three. Collect them into a single file set, and mark every field you could not answer as unknown rather than leaving it blank or filling it with an assumption.
Share that pack for technical review before any quotation totals are set side by side. A reviewer reading the same four documents you built can point to the attraction entries, measured positions and supply boundaries that still need a named answer before the figures are compared.



